Skip to content
PSC / CLAREX
Main Menu
  • Solutions
      Main Menu
      • Display Cover Glass
      • EMI Shielding
      • Optical Filters
  • Base Materials
      Main Menu
      • Acrylic (PMMA)
      • Polycarbonate (PC)
  • Product Catalog
  • Cases
  • Company
      Main Menu
      • About Us
      • Our Process
  • Resources
      Main Menu
      • Articles
      • Documentation
  • EN
    • DA
    • DE
Get in touch

Best Materials for Sensor Covers: Glass, Polycarbonate or Acrylic?

  • Last Updated November 3, 2026
  • Written by Arnth Henriksen
Compare glass, polycarbonate and acrylic for sensor covers. Explore optical clarity, impact resistance, protective coatings and manufacturing.

Table of Contents

Introduction

A sensor cover is much more than a transparent protective window. It often sits directly in the optical or electromagnetic signal path, influencing measurement accuracy, signal quality and the long-term reliability of the entire device.

At the same time, it must protect sensitive electronic components against scratches, moisture, chemicals and mechanical stresses.

The best materials for sensor covers cannot therefore be identified through a universal ranking. What matters is the interaction between sensor technology, operating environment, material properties, component geometry and industrial manufacturing.

For OEM manufacturers, material selection is particularly important. A material with excellent impact resistance may introduce optical distortion under certain conditions. A highly transparent surface may develop scratches without suitable protection. And an electrically conductive coating designed to reduce electromagnetic interference may also affect sensor performance.

The optimal sensor cover must therefore do more than protect the sensing element. It must also support the intended functionality of the complete device.

Glass, Polycarbonate or Acrylic: Understanding the Key Differences

For many industrial sensor applications, three transparent substrate materials are particularly relevant: glass, polycarbonate and acrylic.

Each offers distinct technical advantages and limitations.

The appropriate choice depends on which properties are essential to the specific sensor system.

Property Glass Polycarbonate (PC) Acrylic (PMMA)
Optical clarity Excellent Good to excellent Excellent
Scratch resistance without coating High Relatively low Better than PC, lower than glass
Impact toughness Depends on glass type and strengthening; brittle fracture Very high Lower than PC
Weight Relatively high Low Low
Chemical resistance Good against many chemicals Depends on chemical and loading Depends on chemical; stress cracking risk
Complex forming More demanding Well suited Well suited
Typical advantage Optical stability and surface durability Impact resistance and design flexibility Transparency and economical processing

This comparison provides initial guidance. Actual performance depends on the specific material grade, thickness, surface treatments and manufacturing process.

Glass for Optical Stability and High Scratch Resistance

Glass is often preferred when optical precision, scratch resistance and long-term stability are the main priorities.

Its hard surface generally withstands mechanical abrasion significantly better than uncoated transparent polymers.

This is particularly important for sensor windows that are cleaned frequently or operated in environments containing dust and abrasive particles.

Typical applications include:

  • Camera windows and industrial machine vision
  • Barcode and code-reading equipment
  • Optical measurement and inspection systems
  • Protective windows for certain LiDAR applications
  • Medical and industrial sensor interfaces

Another important advantage is dimensional stability.

Glass generally absorbs relatively little moisture and undergoes smaller dimensional changes with temperature than many engineering polymers.

This can be beneficial in measurement systems where minor deformation, changes in position or optical distortion may affect performance.

Glass also provides a suitable substrate for many functional coatings.

These include anti-reflective treatments, spectral filters and selected electrically conductive layers.

However, glass is not always the optimal material.

Its relatively high weight and brittle fracture characteristics must be considered during design.

Chemical strengthening or thermal toughening can improve mechanical performance but does not replace appropriate engineering.

Edges, holes, cutouts and mounting points are particularly important.

For portable equipment, applications involving significant vibration or large sensor windows, manufacturers must therefore assess whether glass provides the right balance of protection, weight and functionality.

Polycarbonate for Impact Resistance and Complex Geometries

Polycarbonate offers very high impact toughness and relatively low weight.

This makes it attractive for industrial equipment exposed to mechanical shocks, vibration or an increased risk of damage.

Examples include portable measuring devices, sensor covers on manufacturing machinery, rugged outdoor equipment and protective industrial windows.

Polycarbonate also offers versatile machining and forming capabilities.

Complex contours and three-dimensional components may be manufactured more easily or economically than comparable mineral glass designs.

Suitable polycarbonate grades can also provide good optical performance.

However, surface durability is an important limitation.

Without appropriate protection, polycarbonate can develop scratches and abrasion marks more readily than glass.

For optical sensor applications, this is particularly relevant.

Small scratches may create additional scattered light, change reflectance and reduce the ratio between the desired signal and unwanted light.

In cameras and optical measurement systems, these effects can reduce image or measurement quality.

A suitable hard coating can significantly improve scratch and abrasion resistance.

However, the coating must remain compatible with the substrate, component geometry and subsequent manufacturing processes.

Chemical resistance also requires attention.

Certain solvents, cleaning agents and industrial chemicals may damage polycarbonate or cause environmental stress cracking, especially where mechanical stresses are present.

For medical devices, laboratory equipment and sensor covers requiring frequent cleaning, the material should therefore be evaluated using the actual cleaning agents.

General datasheet values are not sufficient to demonstrate durability under every operating condition.

Acrylic for Optical Clarity and Cost-Effective Sensor Windows

Acrylic, also known as polymethyl methacrylate or PMMA, is recognised for its high light transmission and excellent optical clarity.

This makes it suitable for many transparent sensor windows and optical components.

Compared with polycarbonate, uncoated acrylic generally offers better surface hardness but lower impact toughness.

For applications involving limited or moderate mechanical loading, acrylic can therefore be a technically and commercially attractive alternative to glass.

Examples include stationary optical sensors, protected viewing windows and selected measurement or display assemblies.

Acrylic can be precisely machined, printed and bonded.

This enables customised components incorporating specific optical or geometric features.

However, its mechanical limitations must be considered.

Acrylic is more likely to crack or fracture than polycarbonate under severe impacts or concentrated loads.

Unsuitable adhesives, cleaning chemicals or mounting conditions may also contribute to stress cracking.

The good UV and weather resistance of many suitable PMMA grades can offer benefits for certain outdoor applications.

Nevertheless, temperature cycling, mounting arrangements and expected service life must still be evaluated.

Excellent optical clarity is only valuable when the material can also withstand the intended mechanical and chemical environment.

Sensor Technology Determines the Best Cover Material

The decision between glass, polycarbonate and acrylic should not be based solely on mechanical performance.

The operating principle of the sensor is equally important.

An industrial camera, infrared sensor, capacitive proximity sensor and radar system have very different requirements for their protective covers.

Cameras and Visible-Light Optical Sensors

In camera-based applications, light transmission, surface quality, reflectance and optical distortion are often critical.

The protective window should introduce as little unwanted scattering as possible while preserving image quality.

Even minor changes to the surface may influence performance.

Scratches, contamination and additional reflections can cause contrast loss, stray light and unwanted image artefacts.

A suitable anti-reflective coating can help reduce reflections at optical interfaces.

The most appropriate coating depends on factors including the light source, angle of incidence and complete optical design.

Window flatness and its position relative to the sensor may also be important.

For precision machine vision systems, the entire optical window should therefore be specified rather than the substrate material alone.

Infrared Sensors and UV Applications

For infrared and ultraviolet sensors, visible transparency is not a reliable indication of material suitability.

A substrate that appears completely clear to the human eye may substantially attenuate the infrared or ultraviolet wavelengths required by the sensor.

The relevant operating wavelength range must therefore be defined first.

Material suitability depends strongly on the spectral region and specific substrate grade.

Certain infrared applications require specialised optical materials because conventional glass and standard polymers do not provide sufficient transmission.

Coloured and spectral optical filters may also be relevant.

These can transmit selected wavelengths while suppressing unwanted spectral components, helping to reduce interference from ambient illumination.

However, nominal transmission figures are only part of the evaluation.

Angle of incidence, temperature behaviour, ageing and manufacturing tolerances may also influence filtering performance.

Reliable selection therefore requires spectral measurements and functional testing with the intended sensor system.

Capacitive Proximity and Touch Sensors

For capacitive sensors, the electrical properties of the cover material influence operation.

Substrate thickness, dielectric constant and distance from the sensing element can affect sensitivity.

The cover must therefore be selected alongside the electrical sensor design.

Increasing thickness or changing the material stack may require recalibration.

Electrically conductive coatings can also influence the sensor’s electric field.

The cover must consequently meet not only mechanical and optical requirements, but also the electrical characteristics of the intended sensor electronics.

Radar Sensors and Electromagnetic Applications

Radar sensors and other high-frequency systems introduce additional requirements.

In these applications, dielectric properties, material thickness and geometry can significantly influence electromagnetic wave propagation.

An electrically conductive coating may be beneficial for EMI shielding in other electronic assemblies.

On a radar window, however, the same type of coating may reflect or attenuate the signals the sensor needs to transmit and receive.

Electromagnetic shielding and the transmission of the desired sensor signal must therefore be designed together.

Material and coating selection should be based on the actual operating frequencies and the complete electronic architecture.

Surface Coatings Can Improve Sensor Cover Performance

The performance of a sensor cover does not depend exclusively on the substrate.

Functional surface treatments can improve optical properties, durability and ease of cleaning.

However, each coating must match the specific application.

Hard Coatings for Scratch and Abrasion Protection

Hard coatings are particularly relevant for polycarbonate and acrylic.

They can improve resistance to mechanical abrasion and help preserve the optical surface over time.

This is especially important for sensors where scratches may generate stray light and affect signal quality.

However, the coating must also withstand the intended cleaning procedures and remain compatible with the substrate and subsequent manufacturing processes.

Anti-Reflective and Anti-Glare Treatments

Anti-reflective coatings reduce the amount of reflected light.

This can benefit optical sensor systems when unwanted reflections interfere with measurements.

Anti-glare surfaces operate differently by scattering light.

Such treatments can be useful for control interfaces and display fronts but may be unsuitable for precision cameras and imaging sensors.

Additional scattering may reduce image quality.

The two technologies should therefore not be treated as interchangeable solutions.

Anti-Fingerprint and Easy-to-Clean Surfaces

For sensor fronts that are frequently touched, anti-fingerprint coatings may reduce visible marks and simplify cleaning.

Water-repellent and other functional surface treatments may also be appropriate depending on the application.

However, their effectiveness must be maintained under actual operating conditions.

These include repeated cleaning, chemical exposure, temperature fluctuations and mechanical abrasion.

Mechanical Integration and Sealing Are Equally Important

Many sensor cover problems do not originate from the substrate properties themselves.

Instead, they arise at the interface between the protective window, enclosure and sensing element.

Scratches, moisture, condensation, mechanical stresses and unsuitable bonding methods may significantly affect sensor performance.

Edge Design, Sealing and Moisture Protection

Outdoor applications require the construction to prevent moisture and contamination from reaching sensitive components.

Unprotected edges or inadequately sealed joints may create problems.

Appropriate gaskets, mounting arrangements and clearly defined tolerances are therefore important.

Movement or deformation of the equipment enclosure must also be considered.

A sensor window under permanent mechanical stress may become damaged prematurely or introduce unwanted optical distortion.

Adhesive Bonding and Thermal Expansion

In bonded assemblies, the substrate, adhesive and supporting structure must be evaluated together.

Glass, polymers and metals have different coefficients of thermal expansion.

Temperature changes may therefore generate tensile and shear stresses.

An unsuitable adhesive joint can lead to distortion, delamination, stress cracking or optical changes.

Adhesive thickness, elasticity, chemical durability and assembly sequence should therefore be established during the development phase.

From Material Samples to a Production-Ready Sensor Cover

Material selection only becomes technically reliable once the construction has been evaluated under representative operating conditions.

A datasheet or visually impressive sample is not sufficient on its own.

For industrial OEM projects, testing should reflect the complete application.

Relevant evaluations may include:

  • Spectral light transmission and reflectance
  • Sensor signal quality with the final protective cover installed
  • Scratch and abrasion resistance
  • Chemical resistance during repeated cleaning
  • Temperature cycling, humidity and UV exposure
  • Impact and vibration testing
  • Adhesion of coatings and printed layers
  • Sealing performance and long-term mechanical stability
  • Dimensional accuracy and reproducible manufacturing tolerances

Functional testing with the actual sensor and its intended protective cover is particularly important.

Only this type of evaluation can determine whether the window affects measurement performance under real operating conditions.

Requirements for Industrial Series Manufacturing

Beyond technical performance, the selected design must be manufactured consistently and economically.

Tight tolerances and demanding manufacturing features can influence process stability, costs and production capacity.

These may include printed regions, coating zones, cutouts, transparent viewing areas and electrical contacts.

Edge processing, handling of sensitive optical surfaces and quality assurance are also important.

A material with excellent technical properties is not necessarily the best commercial solution if it cannot be manufactured consistently in the required geometry.

Early coordination between product engineering, materials specialists and manufacturing is therefore particularly valuable.

Which Material Is Best for Sensor Covers?

Glass, polycarbonate and acrylic each provide important advantages.

Glass is particularly suitable when scratch resistance, optical stability and long-term surface quality are the primary requirements.

Polycarbonate offers benefits when high impact toughness, low weight and complex geometries are important.

Acrylic can provide excellent optical clarity, good UV resistance and cost-effective processing possibilities.

However, no single material is optimal for every sensor type.

The right solution depends on sensor technology, spectral requirements, mechanical loading, surface coatings and integration into the complete device.

PSC supports industrial projects where material selection, optical functionality, mechanical processing and series manufacturing must work together.

The objective is to translate the actual requirements of a sensor application into a technically reliable component that can be manufactured consistently.

Establishing these requirements before the design is finalised and validating them with representative prototypes helps reduce the risk of later modifications.

The result is a sensor cover that not only protects sensitive electronics but also supports stable measurements and reliable industrial series production.

Picture of Arnth Henriksen

Arnth Henriksen

Arnth Henriksen is an experienced leader with an international background and extensive expertise in sales, marketing, and management. He has worked across multiple industries and has gained solid experience in driving growth and optimizing business strategies. His ability to lead teams and navigate complex international markets has been a key factor in his success. With his broad experience and analytical approach, he has achieved impressive results in both established and emerging markets.
Read more articles by Arnth Henriksen
LinkedIn: LinkedIn
Email: ah@psc.dk

WE ARE READY TO HELP YOU WITH A UNIQUE OPTICAL FILTER SOLUTION

We are ready to help you with a unique optical filter solution.

PSC / CLAREX

Company

About Us

Our Process

Articles

Documentation

Solutions

Display Cover Glass

EMI Shielding

Optical Filters

Custom Solutions

Support

Contact Us

Privacy Policy

Terms of Service

Newsletter

Stay updated with our latest innovations and solutions.

Subscribe to our newsletter

Find us
  • PSC A/S
  • Industrivej 13
  • DK-9700 Brønderslev
  • Denmark
  • CVR: 27852610​
Contact us
  • +45 98 82 29 99
  • contact@psc.dk
Linkedin

Newsletter

Stay updated with our latest innovations and solutions.

Subscribe to our newsletter

© 2024: PSC – MANUFACTURER OF OPTICAL FILTERS AND DISPLAY WINDOW SOLUTIONS

PSC assumes no responsibility for errors or omissions in the content of this site.

Information such as product specifications and technical data are not legally binding and are subject to change.

  • Privacy and Cookie Policy
  • Terms of sale & delivery
Main Menu
  • Home
  • Solutions
    • Display Cover Glass
    • Optical Filters
    • EMI Shielding
  • Base Materials
    • Acrylic (PMMA)
    • Polycarbonate (PC)
    • Glass
  • Product Catalog
  • Cases
  • Company
    • About Us
    • Our Process
  • Resources
    • Articles
    • Documentation
Get in touch