Skip to content
PSC / CLAREX
Main Menu
  • Solutions
      Main Menu
      • Display Cover Glass
      • EMI Shielding
      • Optical Filters
  • Base Materials
      Main Menu
      • Acrylic (PMMA)
      • Polycarbonate (PC)
  • Product Catalog
  • Cases
  • Company
      Main Menu
      • About Us
      • Our Process
  • Resources
      Main Menu
      • Articles
      • Documentation
  • EN
    • DA
    • DE
Get in touch

How to Integrate EMI Shielding into Displays

  • Last Updated November 3, 2026
  • Written by Arnth Henriksen
Learn how to integrate EMI shielding into displays using conductive coatings, metal mesh, edge contacts and reliable industrial manufacturing.

Table of Contents

Introduction

The display opening is often one of the largest areas of an electronic enclosure through which electromagnetic fields can pass. This is where demanding requirements for image quality, usability and electromagnetic compatibility come together. When integrating EMI shielding into a display, it should therefore not be treated as an additional layer applied late in development. Instead, shielding needs to be engineered as an integral part of the complete optical, mechanical and electrical system.

This is particularly important for industrial HMIs, medical devices, automotive applications and sensor-based electronics.

Switching regulators, processors, wireless modules, touch controllers and high-speed data lines can generate electromagnetic interference. At the same time, external electromagnetic fields may affect the operation of sensitive electronic components.

The device front must therefore contribute to effective electromagnetic shielding without compromising display readability, touch functionality or long-term durability.

A reliable solution can only be achieved when shielding materials, installation geometry, electrical connections and the optical layer structure are coordinated early in the design process.

Why the Display Front Is Critical to Electromagnetic Compatibility

A closed metal enclosure can provide effective shielding against electromagnetic emissions and external interference.

However, the opening required for a display interrupts the continuous conductive structure of the enclosure.

Without appropriate measures, the display area can therefore become a weak point through which electromagnetic fields may enter or escape.

The significance of this opening depends on factors such as its dimensions, the relevant frequencies, the internal electronics and the mechanical construction.

As displays become larger and electronic systems operate at higher clock frequencies with faster switching transitions, shielding requirements may become more demanding.

The cover glass performs several functions simultaneously.

It protects the display and any integrated touch sensors against scratches, chemicals, mechanical impacts and moisture.

It also influences light transmission, reflections, image contrast and colour reproduction.

By incorporating an electrically conductive coating or structure, the cover glass can provide an additional electromagnetic shielding function.

However, combining these properties creates important engineering challenges.

A measure that improves shielding effectiveness may also change optical performance or introduce additional integration requirements.

Maximising electrical conductivity is therefore not automatically the most important objective.

Depending on the relevant frequency range, required shielding attenuation, display technology and lighting environment, a coating offering better optical properties with somewhat lower conductivity may provide the most appropriate overall solution.

The decisive factor is performance within the fully assembled device.

Integrating EMI Shielding into Displays: Available Technologies

Several technologies can provide electromagnetic shielding for transparent display fronts.

The main options include transparent conductive coatings, fine metal meshes and laminated conductive film structures.

The most suitable solution depends on the required shielding attenuation, optical performance, component dimensions, available installation space and expected production volumes.

Transparent Conductive Coatings

Transparent conductive coatings can be applied to glass or suitable plastic substrates.

Common examples include transparent conductive oxides such as indium tin oxide (ITO).

These layers provide a relatively uniform optical surface and can be integrated into different glass and display assemblies.

Shielding effectiveness depends on factors including sheet resistance, coating quality, operating frequency and electrical contacting.

This technology is particularly attractive when a visually uniform and high-quality device front is required.

However, the conductive layer can influence light transmission, reflectance and colour reproduction.

When particularly high shielding effectiveness is required, the conductivity of a transparent coating may also become a limiting factor.

In such cases, it may be necessary to modify the layer structure, improve edge contacting or consider an alternative shielding technology.

Fine Metal Mesh and Conductive Grid Structures

Another approach involves integrating a fine electrically conductive metal mesh.

These structures can provide high shielding effectiveness while allowing a substantial proportion of visible light to pass through.

Important design parameters include mesh spacing, conductor diameter and the optical orientation of the pattern.

One particular challenge is the potential for Moiré effects.

These can occur when the regular mesh pattern interacts with the pixel structure of the display.

The result may be visible interference patterns or other distracting optical artefacts.

Metal mesh should therefore never be selected independently of the intended display.

Pixel pitch, resolution, viewing distance, display brightness and, where relevant, polarisation characteristics can all influence perceived image quality.

Mechanical integration is equally important.

Inadequate lamination, localised stresses, contamination or trapped air can significantly reduce optical performance.

Careful coordination between mesh design, display characteristics and manufacturing methods is therefore essential.

Laminated Shielding Films and Polymer-Based Solutions

Electrically conductive films provide additional design flexibility.

They can be particularly attractive when low weight, reduced risk of fracture or complex component geometries are priorities.

Depending on the application, polycarbonate or acrylic may be suitable substrate materials.

The material selection process should consider optical requirements alongside impact resistance, chemical durability, temperature behaviour and processing capabilities.

Polymer-based assemblies often require additional surface protection.

Without a suitable hard coating, polycarbonate and other plastics may develop visible scratches more quickly than glass during intensive cleaning or use in harsh industrial environments.

Plastics also respond differently to temperature changes, moisture and certain cleaning chemicals.

These considerations are particularly important in medical technology and outdoor industrial terminals.

Electromagnetic shielding effectiveness alone is not sufficient to demonstrate the long-term suitability of a laminated film or polymer-based construction.

Why Electrical Edge Contacting Is Essential

A conductive coating or metal mesh can only provide reliable shielding when it is electrically integrated into the enclosure design.

A common weakness is therefore not the conductive surface itself, but the interface between the display front, contact area and device housing.

Many designs incorporate a continuous conductive contact region around the edge, commonly referred to as a busbar.

This can be produced using conductive printing, metallisation or a suitable electrically conductive adhesive system.

Because the contact area is typically concealed by the enclosure frame, it does not necessarily affect the visible appearance of the device.

The important requirements are sufficient contact area, controlled electrical contact resistance and reliable performance throughout the intended service life.

Spring contacts, conductive gaskets or mechanically fastened contact points may be used to establish the connection.

However, their design must account for dimensional tolerances, contact forces, material ageing and potential changes caused by temperature fluctuations.

A connection established at only a few points may be insufficient for larger display fronts or certain frequency ranges.

Non-conductive paint, adhesives and anodised metal surfaces can also compromise electrical continuity.

Contact arrangements should therefore be both specified during design and tested under realistic assembly conditions.

The complete chassis and grounding concept is equally important.

Poorly coordinated connections between chassis ground, protective earth and signal ground may introduce additional interference paths or shift existing problems elsewhere in the system.

The appropriate solution depends on the device’s complete electrical architecture.

These decisions should therefore be made through collaboration between electronics engineering, mechanical design and cover glass development rather than being postponed until final assembly.

Balancing Optical Quality and EMI Shielding

Every additional functional layer in a transparent display front can affect visual performance.

Important optical characteristics include light transmission, reflectance, haze and colour reproduction.

Effective EMI shielding should therefore never be developed independently of the display’s optical requirements.

Particularly for displays with limited brightness reserves, reduced light transmission can significantly impair readability under strong ambient lighting.

Anti-reflective coatings and anti-glare surfaces can help reduce distracting reflections.

However, the technologies work differently.

An anti-glare surface distributes direct reflections through controlled light scattering, making glare less noticeable.

An anti-reflective coating reduces reflected light through a carefully engineered optical layer structure.

A heavily matte surface may nevertheless affect image sharpness and perceived contrast.

Anti-reflective coatings must also be evaluated for scratch resistance, cleanability and long-term durability.

Electromagnetic shielding, optical surface treatments and the remaining display layers should therefore be developed as a coordinated system.

Accounting for Touch Functionality

Integrating capacitive touch functionality introduces an additional challenge.

Projected capacitive touch sensors respond to changes in electrical fields.

Additional conductive layers, their position within the display stack and the selected grounding arrangement can therefore influence touch performance.

Depending on the construction, a shielding layer may improve resistance to electromagnetic interference or make touch sensor tuning more complex.

The distance between the conductive layer and the sensor, along with the electrical connections, can be particularly important.

Touch functionality and electromagnetic shielding should therefore not be validated separately.

Functional testing with the actual display, touch sensor and controller is essential to ensure reliable operation.

Translate Requirements into Measurable Technical Specifications

A robust development process should not begin by selecting an available conductive coating.

The first step is to establish the requirements of the complete device.

These include the relevant frequency ranges, necessary electromagnetic shielding attenuation, enclosure construction and display characteristics.

The intended operating conditions and applicable test methods must also be understood.

At a minimum, the technical specification should address the following:

  • Mechanical design: Display dimensions, visible area, border overlap and available electrical contact regions.
  • Display characteristics: Display technology, pixel structure, brightness, touch system and optical performance targets.
  • Operating environment: Temperature, humidity, UV exposure, cleaning chemicals and mechanical stresses.
  • EMC requirements: Applicable standards, test methods, frequency ranges and required limits.
  • Series production: Dimensional tolerances, electrical contacting, quality control, traceability and assembly processes.

The more precisely these requirements are defined, the easier it becomes to compare potential shielding technologies.

Prototypes can also be designed to support meaningful optical, electrical and mechanical testing.

Relevant inspection parameters may include contact resistance, light transmission, reflectance, surface quality, coating adhesion and electromagnetic shielding effectiveness.

Prototypes Must Represent the Actual Device

A simple laboratory setup using a loosely positioned conductive shielding film may provide an initial indication of whether a particular technology is suitable.

However, the results cannot necessarily be transferred directly to the finished device.

Actual EMC performance depends on the complete construction.

The enclosure, seals, adhesives, mechanical fasteners, circuit board positions, cable routing and electrical connections can all influence the outcome.

A phased development process is therefore often appropriate.

First, potential materials and layer structures are assessed against the electrical and optical requirements.

Next, functional prototypes are produced with representative edge contacts and the most important mechanical interfaces.

The decisive validation then takes place within a representative device enclosure.

Only at this stage can engineers determine whether the assembly meets the required EMC performance for both electromagnetic emissions and immunity.

For industrial series production, manufacturing processes must also be controlled and validated.

Conductive coatings need to be applied consistently. Printed contact areas must be positioned accurately, laminated assemblies should be free from functionally significant defects, and electrical connections must remain reliable across production batches.

A successful prototype therefore becomes a genuinely viable industrial solution only when its performance can be reproduced under controlled manufacturing conditions.

Design the Display Front as a Functional System Component

The best EMI shielding solution is not necessarily the one offering the highest theoretical shielding attenuation.

What matters is a design that meets the relevant EMC requirements in the finished device, maintains the required optical quality and can be manufactured reliably at the planned production volume.

Achieving this requires electrical, optical, mechanical and manufacturing requirements to be considered together.

PSC supports industrial projects involving material selection, cover glass development, functional surface treatments and the transition from prototype designs to series production.

When electromagnetic shielding is developed alongside the display, enclosure and touch system from the beginning, the risk of expensive modifications later can be significantly reduced.

The display front then becomes a carefully engineered functional component rather than an unexpected weakness in the device’s electromagnetic compatibility.

Properly integrated EMI shielding therefore does more than protect the electronics. It also contributes to optical performance, reliable operation and the long-term functionality of the complete device.

Picture of Arnth Henriksen

Arnth Henriksen

Arnth Henriksen is an experienced leader with an international background and extensive expertise in sales, marketing, and management. He has worked across multiple industries and has gained solid experience in driving growth and optimizing business strategies. His ability to lead teams and navigate complex international markets has been a key factor in his success. With his broad experience and analytical approach, he has achieved impressive results in both established and emerging markets.
Read more articles by Arnth Henriksen
LinkedIn: LinkedIn
Email: ah@psc.dk

WE ARE READY TO HELP YOU WITH A UNIQUE OPTICAL FILTER SOLUTION

We are ready to help you with a unique optical filter solution.

PSC / CLAREX

Company

About Us

Our Process

Articles

Documentation

Solutions

Display Cover Glass

EMI Shielding

Optical Filters

Custom Solutions

Support

Contact Us

Privacy Policy

Terms of Service

Newsletter

Stay updated with our latest innovations and solutions.

Subscribe to our newsletter

Find us
  • PSC A/S
  • Industrivej 13
  • DK-9700 Brønderslev
  • Denmark
  • CVR: 27852610​
Contact us
  • +45 98 82 29 99
  • contact@psc.dk
Linkedin

Newsletter

Stay updated with our latest innovations and solutions.

Subscribe to our newsletter

© 2024: PSC – MANUFACTURER OF OPTICAL FILTERS AND DISPLAY WINDOW SOLUTIONS

PSC assumes no responsibility for errors or omissions in the content of this site.

Information such as product specifications and technical data are not legally binding and are subject to change.

  • Privacy and Cookie Policy
  • Terms of sale & delivery
Main Menu
  • Home
  • Solutions
    • Display Cover Glass
    • Optical Filters
    • EMI Shielding
  • Base Materials
    • Acrylic (PMMA)
    • Polycarbonate (PC)
    • Glass
  • Product Catalog
  • Cases
  • Company
    • About Us
    • Our Process
  • Resources
    • Articles
    • Documentation
Get in touch