Anyone developing displays for vehicles, medical devices or industrial control panels will recognise a common challenge: a display performs exceptionally well in the laboratory but becomes difficult to read under real operating conditions because of poor contrast, strong reflections or environmental influences. This is where optical filters for displays play a crucial role. They help determine whether a display remains clearly readable and performs reliably throughout the product’s service life.
In industrial applications, the goal extends far beyond creating an attractive appearance. An optical filter is a functional part of the complete system, which includes the display, cover glass, bonding, housing and surrounding lighting conditions. Evaluating the filter in isolation can lead to important interactions being overlooked. When properly integrated, however, it can improve readability, protection, electromagnetic compatibility and the perceived quality of the finished product.
The term “optical filter” is often used to describe several different technologies in development projects. These may include colour filters, neutral density filters, anti-reflective coatings, UV- or IR-blocking layers, EMI shielding glass or combinations of different solutions.
For technical decision-makers, the product designation is therefore less important than the specific function the filter needs to perform in the finished device.
A display filter can reduce unwanted reflections, selectively transmit or block certain wavelengths and improve perceived contrast under strong ambient lighting. Depending on its material and construction, it may also contribute to the mechanical protection of the display.
The selection process becomes particularly complex when the device also incorporates optical sensors. In these cases, the filter’s characteristics must be compatible with both the display and the sensors’ measurement functions.
For example, a filter may look excellent to the human eye while simultaneously reducing the performance of a camera, a Time-of-Flight (ToF) sensor or an infrared-based control function. This can occur when the filter’s spectral transmission has not been properly matched to the system.
Reliable development therefore begins not with the datasheet of a particular material, but with a clear definition of the optical and functional requirements of the complete device.
The actual performance of an optical filter depends heavily on how it is installed and integrated. The same filter can produce very different results when used with two different displays.
Beyond the filter’s own characteristics, factors such as display brightness, polarisation behaviour, air gaps, optical bonding and surface geometry all influence the optical result.
Anti-reflective treatment is a typical example. A matte surface or an anti-reflective coating can significantly reduce unwanted reflections. Depending on its design, however, it may also affect colour reproduction, light scattering and ease of cleaning.
In equipment designed for environments with demanding hygiene requirements, a surface with excellent anti-reflective properties may therefore still be unsuitable if it cannot withstand the required cleaning and disinfection procedures.
Similar challenges arise with tinted filters. They can improve the appearance of a switched-off display and conceal certain elements when the screen is inactive.
However, tinting generally reduces light transmission. If the display has sufficient brightness reserve, this drawback may be acceptable. If its available luminance is already limited, a design decision can quickly turn into a functional problem.
Filter characteristics, display performance and expected operating conditions should therefore always be evaluated together.
The choice of base material affects optical properties, manufacturing possibilities, mechanical strength and the service life of the entire front assembly.
Glass is often the preferred material for industrial applications where high scratch resistance, chemical durability and a premium, long-lasting surface are important. It is particularly suitable for displays that must maintain optical precision and consistent quality over many years.
Polycarbonate offers several advantages when high impact resistance, low weight or complex mechanical integration is required.
These properties can be particularly valuable in portable equipment and systems exposed to vibration. However, its lower surface hardness and potential need for additional protective coatings must be considered from the beginning.
Acrylic stands out for its excellent optical clarity and cost-effective processing capabilities. It can be an attractive option when high transparency, precise shapes and controlled manufacturing costs need to be combined.
Here, too, long-term suitability depends on the actual stresses the material will experience. UV exposure, cleaning chemicals and mechanical wear must therefore be considered during selection.
There is no universally superior material. The important factor is how well the substrate, functional coatings and mechanical installation are matched to the intended operating environment.
Many differences in optical and mechanical performance arise not from the base material itself, but from the surface coatings applied to it.
Anti-reflective coatings reduce unwanted reflections and improve perceived display readability. Hard coatings increase resistance to abrasion and minor surface damage.
Anti-fingerprint coatings simplify cleaning and make fingerprints less noticeable on the surface. EMI shielding can also help protect sensitive electronic systems against electromagnetic interference.
EMI shielding is a particularly good example of why balancing different technical requirements matters. High shielding effectiveness can be achieved using suitable electrically conductive layers, but these may also affect light transmission, colour neutrality or the visibility of fine details on the display.
For OEM projects, the objective is therefore rarely to maximise a single performance parameter. Instead, the aim is to develop a balanced solution combining adequate electromagnetic shielding, good optical quality and economically viable manufacturing.
Printing on the cover glass also plays a greater role than might initially be expected.
Black printing, transparent viewing areas, masking and functional printed elements help determine how the display is visually integrated into the front of the device. At the same time, they influence dimensional and positional tolerances during assembly.
If the printed design, filter function and mechanical reference points are not carefully aligned, problems with fit and inconsistent quality may occur during series production.
Many challenges arise not because the required technology is unavailable, but because development activities take place in the wrong order.
A common approach is to select the display first, design the cover glass afterwards and only then search for an optical filter capable of compensating for any remaining weaknesses.
This approach has limitations. When filtering requirements are considered too late, certain optical or mechanical targets may only be achievable through additional costs or technical compromises.
Another common mistake is evaluating a solution solely through individual samples under normal office lighting conditions.
A filter that performs exceptionally well in diffuse indoor light may deliver significantly poorer results in direct sunlight or when viewed from an oblique angle.
For automotive applications, outdoor installations and medical equipment, the solution should therefore be tested early under realistic lighting conditions, relevant temperature ranges and the expected cleaning cycles.
Manufacturing must also be taken into account.
A solution may offer excellent optical performance while still creating considerable production challenges. These may result from extremely tight tolerances, sensitive glass edges, complicated bonding procedures or variations in coating quality.
Manufacturability becomes particularly important for medium- and high-volume production. Adjustments that can be made manually to individual prototypes may quickly become expensive when repeated across an entire production run.
A good specification for optical display filters combines optical requirements with mechanical properties and the practical capabilities of industrial manufacturing.
The first step is to define exactly which problems the filter needs to solve.
Is the objective to reduce reflections, conceal unwanted areas through black masking, provide UV protection, control infrared light, achieve EMI shielding, improve scratch resistance or combine several of these functions?
The relevant optical performance parameters can then be established.
These typically include light transmission within the intended wavelength range, residual reflection, light scattering (haze), chromaticity coordinates and, where necessary, polarisation characteristics.
If the product incorporates optical sensors, the required transmission and blocking ranges for specific wavelengths must also be defined.
However, these values only provide a meaningful picture when tested together with the actual display and the complete optical stack.
Mechanical requirements must be established in parallel. These include material thickness, edge finishing, fracture behaviour, installation dimensions, printed design, cutouts and mounting interfaces.
Only by considering all these factors together can a solution be developed that meets the optical requirements, integrates reliably into the device and can be manufactured consistently.
An experienced development partner can help identify conflicting technical requirements early and determine suitable solutions before they develop into more serious problems. This reduces the need for changes later in the project.
The technical requirements for optical display filters depend heavily on the industry and intended application.
In medical technology, chemical resistance, ease of cleaning, clear readability under intense artificial lighting and consistently high surface quality are often the main priorities.
In industrial automation, the focus is typically on scratch resistance, reliable operation while wearing gloves, resistance to impacts and vibrations, and clear visibility under changing lighting conditions.
Automotive applications often introduce even more demanding requirements. Direct sunlight, substantial temperature fluctuations, integration into vehicle design and long-term resistance to ageing must all be considered.
If the system includes cameras or other optical sensors, it is also essential to ensure that the display filter does not interfere with their performance.
Electronics and OEM applications frequently place particularly high demands on integration into existing designs and manufacturing processes.
In these cases, achieving the desired optical effect is not enough. The component must also be economically manufacturable, provide consistent quality and integrate smoothly into established assembly processes.
Focusing exclusively on the unit price when comparing materials and filters can therefore lead to the actual costs of the complete system being underestimated.
The earlier the optical filter, cover glass, printing and optical bonding are planned as a complete solution, the easier it becomes to achieve the required display performance.
Changes later in the development process are certainly possible, but they often involve additional costs or technical compromises. This is especially true when housing tooling has already been manufactured, the display has been approved or testing and qualification plans have been finalised.
For companies developing technical products, it therefore makes sense to involve a partner who can combine material consultation, prototype development and series production.
For more than 40 years, PSC has worked with solutions where optical functionality, mechanical engineering and industrial manufacturing must operate together.
The advantage lies not only in the available manufacturing capabilities, but also in the ability to translate technical requirements into a robust, production-ready solution at an early stage.
An optical filter is not simply an accessory to be added at the end of product development. It is an essential part of the device’s overall functionality.
Planning the filter solution systematically from the outset improves more than display readability. It can also enhance durability, integration and manufacturing reliability. These are precisely the qualities that determine whether a finished product continues to perform successfully after years of use under real operating conditions.