Skip to content
PSC / CLAREX
Main Menu
  • Solutions
      Main Menu
      • Display Cover Glass
      • EMI Shielding
      • Optical Filters
  • Base Materials
      Main Menu
      • Acrylic (PMMA)
      • Polycarbonate (PC)
  • Product Catalog
  • Cases
  • Company
      Main Menu
      • About Us
      • Our Process
  • Resources
      Main Menu
      • Articles
      • Documentation
  • EN
    • DA
    • DE
Get in touch

Which Standards Apply to Protective Glass in Electronic Devices? An OEM Guide

  • Last Updated November 4, 2026
  • Written by Arnth Henriksen
Which standards apply to protective glass? Explore IEC 60529, IK ratings, environmental testing, optical requirements and OEM manufacturing.

Table of Contents

Introduction

A display cover may look optically flawless and still create problems during product approval. An attractive, defect-free surface does not demonstrate whether the complete construction can withstand the required mechanical, environmental and electrical stresses.

The key question is therefore not only: Which standards apply to protective glass? Manufacturers must also determine which requirements apply to the complete device, which of those requirements involve the front panel and how compliance or performance will be demonstrated after installation.

There is rarely one universal standard covering every type of technical protective glass. Depending on the application, relevant requirements may arise from IEC, ISO, ASTM and UL standards, industry-specific regulations and customer specifications.

For OEM manufacturers, this means that substrate selection, surface treatments, mechanical integration and testing requirements should be coordinated during the early stages of product development.

Identifying the appropriate requirements early helps avoid unnecessary overengineering, unclear responsibilities and expensive repeat testing shortly before series production.

Protective Glass, Cover Glass or Safety Glass: Understanding the Difference

In industrial electronics, protective glass often refers to the transparent front panel protecting a display, sensor or electronic control interface.

Depending on the application, the component may be manufactured from mineral glass, polycarbonate or acrylic.

Its primary purpose is to protect sensitive components against external influences.

These may include:

  • Scratches and mechanical abrasion
  • Impacts and mechanical shocks
  • Moisture and contamination
  • Cleaning agents and disinfectants
  • UV radiation and temperature fluctuations
  • Dust and other industrial environmental conditions

The protective panel may also perform additional functions.

Anti-reflective coatings can improve display readability, while optical filters can transmit or block selected wavelengths.

Electrically conductive coatings may contribute to electromagnetic shielding.

Industrial control panels may also integrate capacitive touch functionality, screen printing, backlit symbols and transparent sensor windows.

Safety Glass Standards Are Not Universally Applicable

Technical front panels should not automatically be classified in the same way as safety glass used in construction, vehicle glazing or personal protective equipment.

For example, ANSI Z87.1 addresses occupational and educational eye and face protection. It is not a general standard for industrial HMI front panels.

Building glass standards are not automatically applicable to medical electronics or industrial control equipment either.

The relevant requirements depend on the panel’s actual function, the complete device architecture and the intended application.

Overview of Important Standards for Technical Protective Glass

Different standards address different aspects of product performance.

Some apply to complete electrical equipment and enclosures, while others provide test methods for materials and surface coatings.

Standard Application Relevance to protective glass
IEC 60529 IP protection ratings Protection against access, solid objects and water
IEC 62262 IK impact ratings Resistance of equipment enclosures to external mechanical impacts
IEC 60068 Environmental testing Temperature, humidity, vibration and other environmental stresses
ISO 9211 Optical coatings Specification and testing of functional optical coatings
ISO 9022 Optical instruments Environmental testing of optical assemblies
IEC 61000 Electromagnetic compatibility EMC requirements and test methods, depending on the application
IEC 60601-1 Medical electrical equipment Basic safety and essential performance
ISO 16750 Automotive electronics Environmental conditions and testing for vehicle electronic components
UL 94 Polymeric materials Flammability classification
ASTM D1003 Transparent plastics Luminous transmittance and haze
ISO 15184 / ASTM D3363 Surface coatings Pencil testing of coating film hardness

This is a reference overview, not a list of standards that automatically apply to every product.

The actual requirements depend on device classification, target markets, applicable legislation and contractual specifications.

IP Protection According to IEC 60529

IEC 60529 defines degrees of protection provided by enclosures for electrical equipment.

The IP classification addresses protection against access to hazardous parts, ingress of solid foreign objects and water.

For protective glass, the important distinction is that an IP rating does not describe the glass substrate alone.

It applies to the relevant enclosure construction.

What Do IP65 and IP67 Mean for a Front Panel?

An IP65 target includes requirements for dust-tight protection and resistance to water jets.

IP67 includes dust-tight protection and resistance to temporary immersion under specified testing conditions.

These ratings involve different water-exposure tests and should not automatically be treated as interchangeable.

If a front panel forms part of an enclosure requiring a particular IP rating, several elements must function together:

  • Gaskets and sealing surfaces
  • Adhesives and bond lines
  • Frames and enclosures
  • Mechanical mounting points
  • Cover panel dimensional tolerances
  • Edges and cutouts

Even a mechanically strong glass panel cannot provide adequate sealing if the connection between the panel and enclosure is unsuitable.

Temperature cycling and differences in material expansion may also affect seals and adhesive joints.

The complete design must therefore account for expected movement and long-term environmental exposure.

The required IP rating should be verified on a representative enclosure assembly, not inferred from the properties of the cover glass alone.

IK Impact Protection According to IEC 62262

IEC 62262 describes degrees of protection provided by electrical equipment enclosures against external mechanical impacts.

The levels are expressed using IK classifications.

These requirements are especially relevant for equipment exposed to accidental or deliberate mechanical loading.

Typical applications include:

  • Publicly accessible control terminals
  • Electric vehicle charging stations
  • Industrial machine controllers
  • Outdoor displays
  • Transport and logistics equipment
  • Electronic devices in demanding manufacturing environments

Why Glass Thickness Alone Is Not Enough

Increasing panel thickness may improve mechanical resistance in some designs.

However, thickness alone does not establish a particular IK rating.

The complete construction influences performance.

Important factors include unsupported panel dimensions, mounting conditions, edge finishing and the distribution of mechanical forces.

Holes, cutouts and tight internal radii can introduce local stress concentrations.

For glass components, these may increase fracture risk even when the main panel surface appears sufficiently strong.

Chemically strengthened or thermally toughened glass can improve mechanical performance.

For impact-intensive applications, polycarbonate may offer advantages over glass.

However, suitability still depends on material grade, thickness, geometry, temperature and mounting.

An IK test result should therefore be associated with the particular enclosure construction that was tested.

Environmental Testing According to IEC 60068

The IEC 60068 series provides methods for evaluating equipment and components under defined environmental stresses.

Depending on the selected part, relevant tests may address:

  • High and low temperatures
  • Temperature changes
  • Humidity exposure
  • Vibration
  • Mechanical shock
  • Other environmental stresses

These tests are important because the properties of protective glass assemblies depend on interactions between different materials.

A panel may have excellent initial optical characteristics but develop problems once bonded to polymers, metal frames or other components and exposed to temperature cycling.

Thermal Expansion and Mechanical Stress

Glass, polycarbonate, acrylic and metals expand at different rates when temperatures change.

Adhesives and sealing materials also have their own thermal and mechanical properties.

If the components are joined too rigidly, significant stress may develop.

Potential consequences include:

  • Front panel deformation
  • Stress cracking in polymer components
  • Adhesive delamination
  • Reduced sealing performance
  • Damage to coatings or printed layers

The mechanical design must therefore account for operating temperatures, substrate combinations and adhesive joint geometry.

Humidity and Chemical Exposure

Moisture can affect coatings, adhesives and the interfaces between materials.

Condensation may also interfere with displays and optical sensors.

Repeated cleaning introduces additional chemical stresses.

However, humidity testing does not automatically establish resistance to cleaning agents or disinfectants.

The intended chemicals, concentrations and cleaning procedures should therefore be evaluated using appropriate additional tests.

ISO 9211 and ISO 9022 for Optical Components

Protective glass incorporating specialised optical coatings or functions may require additional optical testing.

ISO 9211 and ISO 9022 provide useful frameworks for certain applications.

ISO 9211 for Optical Coatings

The ISO 9211 series addresses optical coatings, including their specification and testing.

It can be relevant to:

  • Anti-reflective coatings
  • Optical filter coatings
  • Selected protective optical layers
  • Coatings with defined transmission and reflectance characteristics

ISO 9211-4 describes specific methods for evaluating abrasion, adhesion and resistance to water.

These methods allow selected properties of an optical coating to be assessed systematically.

However, the test conditions and permissible changes must still be defined for the application.

Passing an optical coating test does not automatically establish the mechanical impact resistance or ingress protection of the complete device.

ISO 9022 for Optical Instruments

The ISO 9022 series provides environmental test methods for optical instruments and associated assemblies.

It may be relevant when the protective window forms a critical part of an optical measurement system.

For industrial cameras, sensors and precision instruments, engineers may need to verify that optical performance remains within specification after environmental exposure.

Relevant characteristics may include transmission, reflectance, optical uniformity and mechanical stability.

The appropriate tests depend on the intended optical function and operating conditions.

Electromagnetic Compatibility and EMI Shielding

Some electronic devices require the front panel to contribute to electromagnetic compatibility.

Transparent conductive coatings or fine metal structures can be integrated for this purpose.

Such EMI shielding glass can reduce electromagnetic interference.

However, the relevant EMC requirements normally arise from regulations and standards applying to the complete equipment.

Depending on the product, parts of the IEC 61000 series or other product-specific standards may be relevant.

Additional FCC requirements may apply to equipment marketed in the United States.

Why Electrical Contacting Is Critical

Shielding effectiveness depends on more than the conductivity of the transparent coating.

Important factors include:

  • Sheet resistance
  • Coating construction and conductive structures
  • Electrical contact to the supporting frame
  • Perimeter connections
  • Grounding and enclosure design
  • Relevant interference frequencies

A highly conductive front panel may fail to deliver sufficient shielding if its connection to the enclosure is poorly designed.

Optical trade-offs must also be considered.

Conductive layers may influence light transmission, reflectance and colour appearance.

In capacitive touch systems, they may also interfere with the sensor’s electrical field.

EMC validation should therefore use an assembly representative of series production, including frames, seals, electrical contacts and cabling.

Industry-Specific Requirements for Medical and Automotive Equipment

In some industries, general material tests are not sufficient.

Additional product-level safety and environmental requirements may apply.

Medical Electrical Equipment and IEC 60601-1

IEC 60601-1 is an important standard for basic safety and essential performance of medical electrical equipment.

Depending on the product, additional collateral or particular standards may apply.

Relevant front-panel requirements may include:

  • Mechanical strength
  • Resistance to cleaning and disinfection
  • Safe operation
  • Display readability
  • Durability of coatings and printing
  • Integration into the equipment’s electrical safety architecture

The requirements must be evaluated in relation to the actual medical device.

A protective glass component does not automatically establish full IEC 60601-1 compliance simply because individual material tests have been passed.

Automotive Electronics and ISO 16750

The ISO 16750 series addresses environmental conditions and testing for electrical and electronic equipment used in road vehicles.

Test requirements depend partly on component mounting location.

For displays and front panels, temperature, humidity and mechanical stresses can be important.

Substrates, printing inks, coatings and adhesives must withstand the relevant operating conditions.

Additional legal requirements may apply to specific safety-related glazing or other automotive components.

UL 94 for Polymeric Materials

For equipment intended for North American markets, the flammability characteristics of polymeric materials may be relevant.

UL 94 provides methods for testing the flammability of plastics used in devices and appliances.

The classification may matter when polycarbonate or acrylic is selected for protective panels.

However, it does not establish scratch resistance, ingress protection or optical quality.

The tested material thickness and its intended use must also be considered.

Optical Testing: Transmission, Haze and Surface Durability

Meeting mechanical protection and environmental requirements does not automatically mean a display will be easy to read.

Optical properties should therefore be specified separately.

Important characteristics include:

  • Light transmission and haze
  • Surface and internal reflections
  • Gloss
  • Colour reproduction
  • Optical uniformity
  • Viewing angle
  • Permissible cosmetic defects

ASTM D1003 for Transparent Plastics

ASTM D1003 describes a method for measuring luminous transmittance and haze in transparent plastics.

It may be appropriate for polymer-based cover panels and protective windows.

Other or additional measurement methods may be required for specialised optical filters and glass.

The measurement geometry and spectral conditions must match the intended function.

ISO 15184 and ASTM D3363 for Coating Hardness

ISO 15184 and ASTM D3363 describe pencil-test methods for evaluating coating film hardness.

These methods can be useful for assessing certain surface treatments.

However, high pencil hardness does not mean that a surface will resist every type of scratching or abrasion during service.

Actual durability depends on contact materials, pressure, abrasive particles and cleaning procedures.

Additional abrasion, adhesion and long-term durability testing may therefore be necessary.

Results should also be interpreted carefully when comparing substantially different coating systems.

From Standards to a Testable Technical Specification

The most efficient development process does not begin by selecting as many standards as possible.

It begins by defining the actual operating conditions and functional requirements of the finished device.

Relevant standards, test methods and acceptance limits can then be selected.

What Should a Protective Glass Specification Include?

Important information may include:

  • Product type and operating environment
  • Applicable regulatory and customer requirements
  • Substrate material and thickness
  • Surface coatings and functional layers
  • Required IP and IK ratings, where applicable
  • Adhesive bonding, sealing and mounting
  • Temperature, humidity and chemical exposure
  • Optical performance limits and allowable defects
  • Test methods and sample quantities
  • Acceptance criteria
  • Documentation and traceability requirements

Responsibility for demonstrating each requirement should also be clear.

Certain material properties can be assessed using individual samples.

Other characteristics, such as enclosure ingress protection and EMC performance, must be verified using the complete or a representative assembly.

Use Representative Prototypes for Validation

An effective prototype should incorporate materials and processing methods as close as practical to those intended for series production.

This includes substrate thickness, coatings, screen printing, adhesives, seals and mounting arrangements.

Where displays, touch sensors or optical sensors are integrated, they should also be included in relevant functional testing.

This allows manufacturers to evaluate the complete system rather than relying only on raw material properties.

Documentation and Quality Control in Series Manufacturing

Passing the required type tests is an important stage in product approval.

However, a successful prototype does not automatically guarantee consistent performance in later production batches.

Critical manufacturing processes must therefore remain controlled.

Important measures may include:

  • Defined substrate grades and supplier specifications
  • Reproducible coating and screen-printing processes
  • Controlled dimensions and edge quality
  • Appropriate handling and protective packaging
  • Incoming inspection and manufacturing quality checks
  • Documentation and traceability where required
  • Change control for materials and manufacturing processes

PSC supports industrial OEM projects by coordinating material selection, surface finishing, mechanical processing and manufacturing requirements.

Considering the relevant testing and quality requirements early can help transfer an approved design into stable series production.

Conclusion: Which Standards Apply to Protective Glass?

There is no single standard covering every requirement for technical protective glass.

IEC 60529 addresses IP protection provided by enclosures, while IEC 62262 classifies resistance to external mechanical impacts.

IEC 60068 provides environmental testing methods. ISO 9211 and ISO 9022 may be relevant to optical coatings and optical assemblies.

Additional requirements depend on the device, industry and target market.

The critical task is therefore selecting the relevant standards and translating their requirements into measurable technical specifications.

The appropriate standard is not merely a quality label for a protective panel. It forms part of the evidence that the complete device front will perform reliably under its intended operating conditions.

Coordinating substrate selection, surface treatments, mechanical design and testing strategy from the beginning creates a stronger foundation for product approval and consistent industrial series manufacturing.

Picture of Arnth Henriksen

Arnth Henriksen

Arnth Henriksen is an experienced leader with an international background and extensive expertise in sales, marketing, and management. He has worked across multiple industries and has gained solid experience in driving growth and optimizing business strategies. His ability to lead teams and navigate complex international markets has been a key factor in his success. With his broad experience and analytical approach, he has achieved impressive results in both established and emerging markets.
Read more articles by Arnth Henriksen
LinkedIn: LinkedIn
Email: ah@psc.dk

WE ARE READY TO HELP YOU WITH A UNIQUE OPTICAL FILTER SOLUTION

We are ready to help you with a unique optical filter solution.

PSC / CLAREX

Company

About Us

Our Process

Articles

Documentation

Solutions

Display Cover Glass

EMI Shielding

Optical Filters

Custom Solutions

Support

Contact Us

Privacy Policy

Terms of Service

Newsletter

Stay updated with our latest innovations and solutions.

Subscribe to our newsletter

Find us
  • PSC A/S
  • Industrivej 13
  • DK-9700 Brønderslev
  • Denmark
  • CVR: 27852610​
Contact us
  • +45 98 82 29 99
  • contact@psc.dk
Linkedin

Newsletter

Stay updated with our latest innovations and solutions.

Subscribe to our newsletter

© 2024: PSC – MANUFACTURER OF OPTICAL FILTERS AND DISPLAY WINDOW SOLUTIONS

PSC assumes no responsibility for errors or omissions in the content of this site.

Information such as product specifications and technical data are not legally binding and are subject to change.

  • Privacy and Cookie Policy
  • Terms of sale & delivery
Main Menu
  • Home
  • Solutions
    • Display Cover Glass
    • Optical Filters
    • EMI Shielding
  • Base Materials
    • Acrylic (PMMA)
    • Polycarbonate (PC)
    • Glass
  • Product Catalog
  • Cases
  • Company
    • About Us
    • Our Process
  • Resources
    • Articles
    • Documentation
Get in touch