Fine Mat™️ A3 is an anti-glare surface treatment for cover glass used on displays. This solution can be used on both acrylic and polycarbonate filters, including EMI-shielded cover glass solutions.
Fine Mat™️ is specifically developed to produce an exclusive-looking matte surface that dramatically reduces glare and still has excellent optical performance. This is because the cover glass retains its light transmission despite the anti-glare surface treatment, depending on which base material it is applied on.
The coating process creates a unique surface structure consisting of lens-shaped microparticles. This structure scatters light and significantly reduces glare. Despite its anti-glare properties, haze is still low, and light emitted from the display doesn’t get blurred, meaning it retains its image quality. Therefore, disturbing glare is significantly reduced with no loss in image quality from the underlying display.
Fine Mat™ A3 can be used in various display applications requiring glare reduction. Filters used in conditions with a lot of direct light, such as sunlight or overhead light sources indoors, can benefit from anti-glare surface treatments to improve the readability of the display.
It is worth noting that A1 is the finest anti-glare solution compared to the other Fine Mat™ options ranging from A1 to A5 – the latter being the most matte solution.
The gloss level of our Fine Mat™️ solutions can be adjusted. A1 is our Anti-Newton grade solution, whereas A3 is suitable for high-resolution displays. A5, which is the most matte solution, is what we usually recommend for digital signage applications. We also have Fine Mat™️ A2 and A4, which naturally fall in between these options. Therefore, we are able to customize the anti-glare solution to exactly match the requirements of your display.
This material can be cut and milled using high-speed routers and cutters suited for machining PMMA and other plastics.
Fine Mat coatings can be laser cut, and cutting parameters must be adjusted to give the best performance for the selected substrate.
Fine Mat can, if allowed by the substrate, be thermoformed and cold-bent.
| Parameter | Test | PMMA (substrate) | PC (substrate) |
|---|---|---|---|
| Transmittance | - | > 90% | > 88% |
| Refractive index | ISO 489 | N/A | N/A |
| Gloss level (20/65/85°) for standard grades* | Measured with BYK Gardner Micro-TRI-Gloss | 15/55/90 | 15/55/90 |
| Parameter | Test | PMMA (substrate) | PC (substrate) |
|---|---|---|---|
| Pencil hardness | ISO 15184 | ≥ 3-4H ** | ≥ 2-3H** |
| Adhesion (cross cut) | DIN 5315 | 100/100 | 100/100 |
| Adhesion (water soak: >15 days @ 65 °C) | DIN 5315 | 100/100 | 100/100 |
| Rape seed methyl esters | Adapted ISO 2812, 1976 (72 hour exposure) | No impact | No impact |
| Isopronaol, 70% | Adapted ISO 2812, 1976 (72 hour exposure) | No impact | No impact |
| Synthetic engine oil | Adapted ISO 2812, 1976 (72 hour exposure) | No impact | No impact |
| Transmission oil | Adapted ISO 2812, 1976 (72 hour exposure) | No impact | No impact |
| Glycols (coolant) | Adapted ISO 2812, 1976 (72 hour exposure) | No impact | No impact |
| PMMA (substrate) | PC (substrate) | |
|---|---|---|
| Standard format | 1000x740 mm | 1000x740 mm |
| Minimum thickness | 0.2 mm | 0.2 mm |
We are ready to help you with a unique optical filter solution.
© 2024: PSC – MANUFACTURER OF OPTICAL FILTERS AND DISPLAY WINDOW SOLUTIONS
PSC assumes no responsibility for errors or omissions in the content of this site.
Information such as product specifications and technical data are not legally binding and are subject to change.
